Tips on how to solve blocked drains on your own

Plunger

The most common tool to clear a blocked drain is a plunger. Stores sell plungers that are specifically for your toilets or sinks. A plunger is useful if the blockage isn’t too deep in the drain.

Crystal Heat

Crystal Heat is good to use to unclog your drains. While using this product, you must wear gloves, or the acid in it will eat through your skin. After you pour Crystal Heat down the drain, wait a few minutes, and rinse your drain with cold water. Don’t use hot water because it will explode. Crystal Heat is acidic, and it’ll dissolve everything that’s blocking your drain.

Wire Hanger

You can always use a wire hanger to clear blocked drains that aren’t deep down in your pipes. Straighten the wire hanger as straight as you can get it, and create a hook on one end. Using a wire hanger will catch hair and other blockages in your pipes. Don’t push anything down further. Take your time, and pull out the blockages slowly.

Baking Soda and Vinegar

If you’re looking for a natural method, baking soda and vinegar is the route to go. You’ll need to mix equal amounts of baking soda and vinegar. Once it starts to fizz, pour it down your drain immediately. The fizzing will remove about everything that Crystal Heat removes, and you don’t have to worry about getting burned or anything exploding in the process.

Vacuum

If you have a vacuum that will clear blocked drains, it’s one of the easiest tools you can use without making a mess. You’ll need to set the vacuum to vacuum liquids before you begin. Next, you’ll need to cover up the vent on the vacuum to prevent a mess. You’ll need to create the tightest seal you can over the drain, and you can begin the process. For this to work, you’ll likely need to put the vacuum on its highest setting. Sometimes, a liquid vacuum will work, and sometimes it won’t. It depends on how deep the blockage is.

Boiling Water

Another natural method is to use boiling water to clear clogs in your drain. You’ll need to boil water in a pot, and slowly pour it down the drain to give it time to work. Try to pour the boiling water in three sessions for the best results. If you decide to use this method, just don’t burn yourself.

Drain Snake

A popular method is to snake a drain if all of the previous methods don’t work. All you’ll need is a long, flexible metal rope.

Dish Detergent

Dish detergent is an excellent method to clear a blockage in your toilet. Pour one-fourth cup of dish detergent in the bowl. You’ll need to boil some water as well. The dish detergent will help break any blockage in the toilet drain. Next, you’ll need to pour boiling water in the bowl. Next, use a plunger to do the rest of the work for you.

Caustic Soda

You’ll need rubber gloves and eye protection for this method. Caustic soda can cause severe chemical burns if you don’t use proper protection for your skin and eyes. You can find caustic soda at your local hardware store. First, pour one gallon of cold water in a bucket. Next, add three cups of caustic soda to the water. Now, stir it with a wooden spoon. After you stir it, pour it in the clogged drain. Let it set for about 30 minutes. Next, pour the boiling water down your drain. You may need to repeat this a few times to get it to work.

Leave a Reply