Home Improvement

How to Soundproof Sash Windows?

Soundproof sash windows will generally improve the comfort of your home by reducing the noise levels. They also retain heat and maintain proper levels of security in your home. They are valuable for every home and increase the quality of your home when looking for natural calmness. Now, in this post, we’ll show you all the professional, do-it-yourself options for all soundproof sash windows.

However, first, to understand how to soundproof sash windows, you’ll need to know how noise is measured which is in Decibels (dB). Of course, high or too much sound decibels are quite dangerous to our health and even cause sleepless nights. With this in mind, here are the most professional and straightforward ways of soundproofing sash windows. Have a look!

Sash Windows DIY Draught Proofing

This technique can reduce the levels of noise in your home considerably. While there no proven studies on how draught proofing improves the lifestyle in your home. It’s clear that an old and draughty sash window, with a high-quality system of soundproofing, transforms and enhances the comfort of your home.

Sash windows come with different insulations and costs. So, if you’re looking to make your home more pleasant without spending too much, you could try applying masking tape to the joints on your sash window. They will prevent the same amount of noise just like a standard sash window, draught proofing system. However, be cautious when doing so as there are several varying sash window conditions.

Secondary Glazing

If you are not comfortable with draught proofing, then the best option based on performance and reliability is secondary glazing. However, it’s done after you’ve thoroughly draught-proofed your sash window. It’s quite cost-effective, and because of the massive cavity of air created after drought proofing together with your secondary glazing unit, noise and heat are significantly reduced.

While the cavity is not completely airtight, it’s pretty close, and the resulting structure is perfectly thick and double glazed. Keep in mind that the thicker the double glazed unit, the better it is!

However, it comes with a vast ‘BUT.’ While it’s the right choice for those of you suffering from constant noise but don’t want to incur too much to achieve perfect soundproofing results, it ends up ruining the aesthetics of a seasoned property. Such means that your home may not the sparkling look you intended it to possess.

Conclusion

A comfortable home is the best environment for relaxing, performing house chores, and reading and even working but noise is its most significant, ‘enemy.’ Luckily, you don’t have to suffer anymore once you understand these two simple soundproofing sash window methods. Although both of them have one or two disadvantages, they still do a lot in making sure that you have a serene living space. They are far much better than having to struggle with noise while in your home. You can have them installed without too much interference with your interior decor and enjoy the calmness that magically transforms your life. Try them out!

Tips For Protection Of Your Home During A Renovation

Going through a renovation of your home can be an exciting thing, especially if you are completing a project you have wanted to do for a long time. Lots of planning and preparation needs to go into a successful renovation project at home. One of the major disadvantages of completing a renovation is that your home can get really dirty and messy. If you don’t want to have to fix any items in your home that get damaged during the project, you will need to take adequate measures to protect the surfaces of the rest of your house while remodeling a room. Below are some great tips for keeping your home safe.

Taking Care Of The Mess

For most homeowners, a major concern during a home renovation project is the amount of mess that can be made around the whole home. Dust and debris can find its way to rooms far away from where you are completing your project. If possible, lay out plastic sheeting over your furnishings throughout the home, or at least in nearby areas, while the project gets completed. This will make cleanup much quicker and easier.

Protection From Fire And Water

Homeowners who are doing a renovation of their home should never take fire safety lightly. Stray sparks of electricity from tools can easily start a fire that will destroy your whole home. You can use fire-proof materials to protect your home’s belongings while completing the project. Likewise, many homeowners fail to adequately protect their home and belongings from water damage during home renovation projects as well. To remedy this, homeowners need to look into products such as an Aqua Shield® from TRIMACO® to help. Their products can be found on their site. This product is water resistant, dust proof and fire proof to keep your work area protected and the area around it protected.

Quality Materials

In order to ensure your home and belongings remain safe, you should only use quality materials and tools during the renovation. If you don’t, you could risk more than just damaging your stuff. When you use unsafe tools, those who are completing the renovation project could risk getting injured or worse.

If you plan to spend many hours and thousands of dollars renovating a room in your home, you should make sure to protect your belongings during the process. It is not a good idea to wait until something bad happens to decide and take extra precaution. When you use the shield from the beginning, you will have much less mess to clean up once the project is completed. You will also not have to worry about any damage being done to your floors, walls or precious belongings while working.

Instances When You Need To Call For Emergency Plumbing Services

An emergency when you need a plumber can be one of the most distressing times. However, most people may not know when to call for emergency service. One thing to bear in mind is that an emergency ought to be fixed as soon as possible. This is to avoid any damage that may be caused. Here are some instances to call for emergency plumbing services.

Frozen pipes

This is common in areas where the weather is extreme. This is common in the winter season. Frozen pipes will not allow any water to go through. The frozen pipe might soon turn into a burst pipe. Trying to thaw pipes on your own is not a good idea. This will cause you, and your family great inconvenience. Give your plumber a call immediately before the problem gets out of hand.

Leaks

With a leak in your pipe or tap, it can be very annoying. This may make you even lack sleep. You may also lose a lot of water and need to pay increased bills. Some of the leaks increase within a short time and can soon get out of hand. To avoid any last-minute rush, call your plumber in North London immediately to rectify the leak.

Clogging

Clogged drains, especially the toilet, can be very serious. It starts with a slow drain of the waste water. The next time might be a flow back, spilling the waste water on your floor. You do not need to wait for this. Call your plumber immediately to unclog the drain before it is too late.

Sewer backup

Sewer backup is as bad as a clogged toilet. This is a major problem and you need a plumber immediately. A flow back of the sewer to your home is not right. It would be tricky to determine the cause on your own, without professional help. Give an immediate call to your plumber to resolve the problem right away.

Scalding water

This is a situation whereby there is extremely hot water coming out of your tap or shower. This means that something is wrong with the heater. This could be caused by overheating and poses a great danger. At times the water may be hot enough to give you a burn. When you notice such an issue, turn the heater off, until you get a plumber to check out the system.

Awful smells

When you notice a foul smell in your home, it is important to call your plumber. This is mainly because there could be a sewer leakage. This needs to be rectified immediately.

There you have it. Some of the reasons why you might need to call your plumber immediately. Avoid any delays that will cause you a bigger situation that will destroy your house or valuables. Whenever you notice a leak, turn off your water until you get a plumber.

Image: pixabay.com

Tankless Water Heater Considerations

If it is time to get a new water heater, you might be considering going tankless. There are a variety of tankless water heaters for homes of all sizes. It is important to weigh the pros and cons of such a shift before jumping in. There are many advantages to such a change but there may be some drawbacks as well.

 

Advantages

 

  •       Convenience: With a tankless water heater, you no longer have to compromise on hot water usage. Your family can take a hot shower one after the other. The joys of continuous hot water cannot be overstated. They also take up much less room than traditional units.
  •       Eco-friendly: These units tend to be more efficient than traditional hot water heaters, possibly as much as 30 percent more efficient than a 50-gallon tank heater. This leads to monthly energy bill savings. Because they don’t have to keep water hot constantly, they are much more efficient. This could save you as much as 20 percent from your water heating bill alone. Electric modes also don’t produce greenhouse gases.
  •       Durable and reliable: Tankless units tend to last between 15 and 20 years. Most hot water heaters that rely on a tank need to be replaced every ten years. This means you can rely on them to deliver hot water when you need it. You also don’t have to worry about leaky tanks.
  •       Clean: You get to enjoy clean, fresh water. With tankless, you don’t have to use water that may have been stored in an old tank that may have accumulated rust. A leaky or busted tank can also cause a lot of damage and lead to mold.
  •       Save space: Because most units are relatively small, they can be mounted under cabinets or in closets. They can even be installed on walls or outdoors. If you choose to mount a unit outside, make sure you have an anti-freeze kit.

 

Disadvantages

 

  •       Up-front costs: One of the biggest disadvantages of tankless water heaters is the up-front costs. They can cost as much as twice that of conventional storage tanks. A traditional tank-style water heater usually starts around $800. Tankless models start around $1,600.
  •       Installation costs: These units need good venting which can be rather costly. There may be other installation costs associated as well. The necessary piping could add up. It all depends on your current situation. If you have hard water, you will need a water softener installed. Some units need to be retrofitted. This can add to the cost of the unit. A skilled plumber can provide the needed details. Gas units may need a larger natural gas line to provide enough fuel to the unit.
  •       Hot water output: The output is split among all your household fixtures. When choosing a model, this should definitely be taken into consideration. A unit that is too small might not be able to keep up with the output. You may need to run your water for a longer period of time while the heater heats up the water. A tank heater might feel like more instantaneous hot water.
  •       Energy requirements: Some models require a lot of energy.
  •       Other considerations: Gas units require annual servicing. Tankless heaters have minimum flow requirements to activate. Gas-powered units produce greenhouse gases that are not good for the environment.

 

In many cases, tankless water heaters are a good investment and offer many advantages. Take the time to compare the energy guide stickers on tank-style and tankless-style models. Weigh in any expenses associated with the switch. Consider the time necessary to regain costs. Your monthly savings may make the up-front costs worth it in the long run. Remember, most tankless models outlast traditional water heaters by five to ten years.

Reasons Why the Flooring of Your Home is Highly Important

When building a home, you will be focused on a number of factors including the colour of the walls, the furniture, the lighting and the waterline. One aspect that is often underestimated, however, is the floor work. Of course, you know that the flooring of your house needs to look pretty and attractive. What you need to understand, though, is that there is so much more work involved than that. In order to make the right decision about this factor, you need to understand why exactly the flooring of a house is important. If you do not know the answer to this already, then keep reading.

It Affects Attractiveness

One of the first things that your visitors are going to notice when they come into your house is the floor. So, if it doesn’t look good, then their first judgement about the house is going to be a bad one. This is why it is imperative for you to take this matter seriously. There are plenty of options in the market which will enable you to increase the appeal of your flooring. For example, opting for sandstone tiles Adelaide is a great idea if you are interested in tiling your floor. This option is not only highly attractive, but it is quite safe too.

It Affects Aesthetics

You should not consider the flooring as a separate portion of the house. This part of the house is connected to every other area as well. So, when deciding on the flooring, you also need to think about how it affects the overall aesthetics of the space. For instance, the walls and the flooring need to match or be in contrast with one another in an artistic manner. If they do not have similarity or an artistic contrast, then it will definitely look weird.

It Affects Safety

A lot of house accidents can be caused if the flooring of your home is not done properly. Depending on the material you have chosen, you can reduce the number of accidents that can happen at your house. For example, opting for something such as carpets can lead to a lot of accidental tripping. So, this might not be safe in a house with children. On the other hand, having a floor with marbles might be dangerous for a house with elderly residents since it can make the space more slippery. In this case, it is highly important for you to choose a safe option.

It Affects Maintenance

When cleaning and maintaining the house, the flooring is something that you will have to take into consideration. If the flooring of the house is too complicated and hard to clean, then maintenance is going to be a tough job for you. For instance, you cannot simply clean carpets by yourself. Sometimes you will have to hire people from the outside. So, when making this decision, you need to look at the long-term requirements such as maintenance too. This way, you can make sure that you are not settling for a costly option.

As you can see, your home floor is definitely more important than it looks. So, when making the decision regarding your home floor, make sure to take the decision seriously. Whatever you choose can affect you for the rest of your life. So, it is highly important for you to make the right choice that benefits you as well as your house.

How to Properly Grout Your Tiles: Tips and Tricks

We all know that tiles, whether for flooring or not, needs grouting. Grouting is the process of filling spaces and gaps to avoid any foreign object from penetrating your tiles. To do this, you need to use a fluid form of concrete. A proper mix of grout and its right application is necessary unless you want to rebuild the flooring over and over again.

Here are the steps on how to grout your tile project.

Step 1: Mix the grout well.

The quality of your grout will highly depend on how you mix it. Most grouts that is available on the market right now are ready-mix. However, experts [refer buying a powdered type and mix it with water. Why? It allows you to estimate the thickness and consistency of the mixture.

After mixing the powder and water, allow it to sit for 10 -15 minutes . This will let the water to moisten up the mix. Then, stir it again. This step is called “slaking.” Continue mixing until the grout reaches a “mayonnaise-like” or “toothpaste-like” texture. Just put it in a small bucket and get ready to apply it.

Always remember that kind of grout you use on all your tiles should be of the same quality.

Step 2: Apply the grout mix on the tiles.

Just get an exact amount and put it in your grout float. Place your float at the bottom of your tile wall and gently push the float upwards. Don’t worry if your grout doesn’t get into the joints quickly.

To force the grout to sink into joints, you must hold the float in a 45-degree angle and push it in a diagonal manner. Take note that your grout mixture easily hardens, depending on the temperature and humidity of your work area. So, you need to clean the tile before the grout gets hard. Otherwise, it’ll be hard to remove it.

Step 3: Remove excess mixture.

Use a clean sponge in removing the excess amount of grout from your tiles. Just get a pail of water and dampen your sponge. Start from one side of the area and move your sponge upwards. Once done, turn your sponge to any side that is clean and continue dragging. If all of the sponge’s side is already used, clean it off using water until all of the grout mixture on the sponge is completely removed.

Do not use a wet sponge, though. It will cause the water to drip down into your tiles, and you will have to clean everything again.

Conclusion

To protect your tiles from interior damage, a proper grouting must be observed. You can do the grouting by yourself. You just have to make sure that all of the grouting steps are followed. If you are not confident with your skills, you can just a hire a skilled worker to do the job for you